RAEGUARD ESGD is a single-sensor fixed gas detector designed to monitor the leakage of the toxic (mainly Carbon Monoxide) or combustible gases (mainly Hydrogen) generated by the battery in the energy storage system due to thermal runaway, and is not used for emergency notification, evacuation of people from buildings, or calling emergency services or communication to fire departments.

The RAEGuard Lite by Honeywell is a cost-effective, fixed gas detector designed for flammable, oxygen, and toxic gases. It provides stable and rapid gas detection in both indoor and outdoor environments, enabling real-time monitoring of hazardous gas levels to ensure the safety of the installation site and personnel.

Honeywell HSCM series carbon monoxide sensors are mainly used to detect carbon monoxide concentration in indoor air where carbon monoxide is generated in parking lots and other places. The sensors can output analog signals and switching signals. and can also transmit detection data through the Modbus RTU protocol for ventilation control.

Honeywell HSP-EW series explosion-proof pressure sensors are mainly used for water systems of central air conditioning system, as well as other liquid or gas pressure measurements with matching temperature, pressure bearing and connection material. The standard thread structure at the bottom of the sensor can be directly installed on the pipeline, and the high-precision sensor components are directly in contact with the medium for pressure measurement.

Honeywell HST-D series duct temperature sensors are applied to measure the HVAC duct air temperature. The HST-D series duct temperature sensors have a variety of control signal outputs and can be compatible with a variety of automatic control systems.

Honeywell HSDP2-A series Air Differential Pressure Transmitters are mainly used to measure air differential pressure or gauge pressure. They are applied to air pressure control of HVAC air system, VAV and fan control, environmental pollution control, pressure difference control of clean room, smoke hood control, oven pressurization and boiler ventilation control, etc.

Honeywell HSFT series frost protection thermostat consists of a gas-filled temperature sensing bulb with long coil and function body of setting and controlling. When the temperature detected by the temperature sensing is higher (or lower) than the set temperature, the body outputs a on/off control signal. The on/off control signal can be used to control switch equipment, including solenoid valves, electric valves, audible and visual alarm equipment, etc.

Honeywell HSP-W series pressure transmitter are applied to HVAC water system and other liquid or gas pressure measuring that temperature, pressure and joint material properties match. The standard threaded connection at the bottom of sensor can be mounted directly on the pipe, and the high precision sensing element can contact the medium directly for pressure measuring.

Honeywell HSCD series carbon dioxide (CO2 ) sensors include two types: indoor installation and duct installation. They are mainly used for detecting carbon dioxide concentration in air of indoor and duct.

Honeywell HSP-HW series pressure transmitters are applied to HVAC water system, District heating water system and other liquid or gas pressure measuring that temperature, pressure and joint material properties match. The standard threaded connection at the bottom of sensor can be mounted directly on the pipe, and the high precision sensing element can contact the medium directly for pressure measuring.

Honeywell LT8000T series liquid level sensors, with its built-in pressure sensor, convert its measured pressure value to a standard current signal out which corresponds to the level of the liquid.

Honeywell HMF-US series ultrasonic flowmeters are primarily used to measure the volume of hot and cold water, suitable for central air conditioning water systems, district heating water systems, and other piping systems whose medium match the applicable media of this product.

Honeywell HST-E series Outside temperature sensors are applied to measure the outside air temperature. The HST-E series outside temperature sensors have a variety of control signal outputs and can be compatible with a variety of automatic control systems.

The Honeywell DPSN Series Air Differential Pressure Switch can be used to monitor the status of filters, fans, and air flow in air ducts. A knob is included on the top of the pressure switch so the pressure value of the application under monitoring can be set within the range as such accuracy will be enhanced.

Honeywell HAQ61 series room air quality sensor is an integrated air sensor which can simultaneously detect five air parameters: air Temperature & Relative humidity, CO2 concentration, PM2.5 concentration and formaldehyde (HCHO) concentration. And calculate and display the concentration of Total Volatile Organic Compound (TVOC).

Honeywell HSL-LS series liquid level switches are mainly used for water level control. Float ball level switch Built-in micro switch. Float ball generally is hanged above the water, when the liquid level rises and the float ball is immersed by the liquid and tilts, triggering the microswitch will trigger and send control signals.

Honeywell HSDP-W Series Liquid Differential Pressure Transmitters are mainly used for the measurement of liquid pressure. The sensitive element of the liquid differential pressure transmitters is a solid piezoresistive sensitive chip, and the part in contact the measured liquid is the corrugated diaphragm on both sides of the transmitters, and the space between the sensitive chip and the corrugated diaphragm is filled with silicone oil. The measured differential pressure acts on the corrugated diaphragm and is transmitted to the sensitive chip through silicone oil. Using the piezoresistive effect of semiconductor silicon materials, the conversion of differential pressure and electrical signals is realized. Since the output signal of the Wheatstone bridge on the sensitive chip has a good linear relationship with the differential pressure, accurate measurement of the measured differential pressure can be realized.

Honeywell WFS series flow switch is used for operational control aiming to prevent control failure which may cause damage to equipment and hazard to operators. It improves safety by setting control limit, alarm and report to monitoring system. WFS series flow switch can be applied to water or other liquid which will not corrode copper. WFS series flow switch provides single pole double throw (SPDT) output with high accuracy and reliability. When the liquid flow rate reaches above or below the set point, one circuit will be closed and the other will be open. It is typically used in situation involving interlocking or close-off protection.

Honeywell HST-R series room temperature sensors are applied to measure the room air temperature of HVAC system. The HST-R series room temperature sensors have a variety of control signal outputs and can be compatible with a variety of automatic control systems.

Honeywell HST-P Series Immersion Temperature Sensors are designed for liquid temperature measurement in pipe system of HVAC. Sensors are available in a variety of length probes and wells for a variety of pipe diameters.

Honeywell HSDP-A series Air Differential Pressure Transmitters are mainly used to measure air differential pressure or gauge pressure. They are applied to air pressure control of HVAC air system, VAV and fan control, environmental pollution control, pressure difference control of clean room, smoke hood control, oven pressurization and boiler ventilation control, etc.

Honeywell HME-US series ultrasonic energy meter is an energy measuring instrument based on ultrasonic flowmeter, suitable for central air conditioning water system and district heating water system. HME-US series ultrasonic energy meter can measure cold and heat.

Air sensors, liquid sensors

The VS9 series FCU control valve offers a wide range of voltages and screw thread connection standards for different regions. There are two-way and three-way valves to cover most of the building control applications. It accepts on-off control signal. Size: DN15~DN25

The WTS3/6/8/9 Series touch button thermostat is a temperature control device with an LCD display providing real time display of room temperature or set temperature. With temperature set, it will provide on/off or modulating control signal to the fan coil valve for the occupant’s desire comfort. It provides both MODBus and standalone versions.

The WS3/8/9 Series wall module is a temperature control device with an LCD display designed based on the standard 86 wall-mount installation box. With temperature set, it will provide on/off or modulating control signal to the fan coil valve for the occupant’s desire comfort. It provides both MODbus and standalone versions.

The VN3/8 series FCU control valve offers a wide range of voltages and screw thread connection standards for different regions. There are two-way and three-way valves to cover most of the building control applications.

WL8/9 series thermostats (wall module) are based on 86 box installation with LCD display. It is a temperature control device with an LCD display providing real time display of room temperature or set temperature. With temperature set, it will provide on/off control signal to the fan coil valve for the occupant’s desire comfort. It provides both MODbus and standalone versions.

The world's leading provider of building automation field equipment

Honeywell VBA16P-series of two-way control ball valves can be used in the HVAC water systems of commercial and public buildings to achieve modulating or On/Off control. Size: DN20~DN80. Pressure Rating: PN16. Connection : Thread BSPP.

Honeywell VH58 series globe valves work with ML35/ML25 series motorized linear actuators to control water flow. Honeywell VH58 can be used in a wide range of applications, such as air handling systems.

Honeywell VPIC series PICV is mainly used to control air conditioning terminal equipment (AHU，FAU，MAU etc.) and other equipment need to be adjusted and balancing control. VPIC series of PICV has built-in linear valve plug and work with M or ML series electric actuator can achieve electric proportional integral adjustment and dynamic differential pressure balance control function.

Honeywell V5011B2/3W series threaded linear valves can work with ML88/ML74/ML64 series linear actuators to control the water flow of central air conditioning system and district heating system.

Honeywell V9BF series butterfly valves and NOM..H electric actuators, with modulating control or two-position control, can be applied to water supply and HVAC systems.

Honeywell V6GV series flange globe valves can be used with ML8824 and ML3524 linear electric actuators to control hot and cold water in central air conditioning systems and district heating systems.

Honeywell VTS16R series motorized linear zone valves work with M400 series thermoelectric actuators.They are applied to control FCU and Radiators (District Heating System). The gradual closing of thermoelectric actuator can effectively prevent water hammer.

Honeywell VMSB16R motorized static balancing valves can adjust the Max Kv value manually, are compatible with M400 series thermoelectric actuator, applied to control AHUs, radiators and small HAVC terminal equipment.

Honeywell VHS Series Static Balancing Valves, through operation of a hand wheel, allow setting of Kv value which corresponds to a preset flow rate.

Honeywell V5GV2/3W series globe valves work with ML8824 series motorized linear actuators to control water flow. V5GV2/3W can be used in a wide range of applications, such as air handling systems.

CS41XX, CS75XX, CS81XX Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air-conditioning (HVAC) systems. They can drive a variety of quarter-turn, final control elements requiring spring return failsafe operation. It can provide reliable control for air damper applications with up to 5 Nm/10 Nm/20Nm.

Honeywell CN series direct-coupled damper actuators provide modulating control and floating/2-position control for: air dampers, VAV units, air handling units, ventilation flaps, louvers. It can provide reliable control for air damper applications with up to 5 Nm/10 Nm/20Nm/34Nm.

Honeywell VBA16F-series of two-way control ball valves can be used in the HVAC water systems of commercial and public buildings to achieve modulating or On/Off control. Size: DN65~DN150. Pressure Rating: PN16. Connection : Flanged connection ISO 7005-2.

Honeywell VDPC series of Dynamic Differential Pressure Control Valves have built-in dynamic differential pressure balancing. Subassembly is assembled by balancing plug, high performance membrane and spring.

Honeywell VSHB Series Static Balancing Valve can preset the flow rate accurately by rotating handwheel and working with suitable commissioning meter.

Honeywell VAFC Series pressure independent control valve is mainly used in controlling small size air handling units, fresh air unit and fan coil unit. The product is built-in with an adjustable valve plug, a pressure independent kit and a maximum flow regulating assembly.

Honeywell MVN-Series Ball Valve Actuator is designed to be used with VBA16P and VBA16F Series Ball Valves. Mounting bracket is included and pre-installed for easy field installation.

The world's leading provider of building automation field equipment

The world's leading provider of building automation field equipment

The PUC MS/TP series programmable unitary controllers support BACnet MS/TP communication protocol.

PUC Series PUC8445 programmable unitary controller supports Ethernet BACnet IP communication which offers fast response in data downloading and updating.

The ECC200 series edge controllers can be used in HVAC, lighting, water supply and drainage control, power transformation and distribution in intelligent buildings.

PUC Series PUC8445 programmable unitary controller supports Ethernet BACnet IP communication which offers fast response in data downloading and updating.

Honeywell intelligent touch screen provides on-site monitoring of users ‘smart building data, real-time monitoring and control of data collected from application scenarios.

As an advanced and comprehensive building automation system, Honeywell KNX Intelligent Control System achieves efficient management and control of the building and smart home through a unified communication protocol and distributed architecture.

With the invention of the world's first thermostats in 1885 and the beginning of leading the global building controls business, Honeywell Building Controls' mission is to redefine what a building can do for the people who depend on it, and how. Through innovative building automation systems, integrate various types of building equipment, design software and applications for users, aiming to improve the comfort, efficiency and energy saving of facilities.

Honeywell has a wide reputation in the industry for providing high-quality Fire Alarm Systems

Honeywell offers a broad range of energy management solutions that span each segment of the value chain, from generation, to transmission, to distribution. Our portfolio of intelligent services, equipment, devices and technologies have been designed to help utilities optimize their enterprise data, assets and resources, so they can operate more safely, sustainably, productively and profitably.

Honeywell Thermal Solutions has been a global leader in industrial and commercial combustion technologies for over a century. With cutting-edge innovation and a comprehensive product portfolio spanning the entire value chain, we deliver burner, valves & control products, customized systems, and expert services to meet the diverse needs of our customers. Our integrated solutions are designed to enhance safety, reliability, and sustainability across industries-empowering businesses worldwide to achieve cleaner, more precise, and more efficient thermal energy performance.

Sensing Technology protects people and assets while increasing productivity through advanced sensing, diagnostics, and hazard detection solutions.

Thank you for your interest in our E2R products. Please complete the form below and our business development representative will reach out.

Honeywell PAVA creates a mission to provide a more complete, safer and more efficient public audio solution for all customers who use voice as a means of disseminating information or improving the environment.

Future-Proof Operations, Improve Workforce Productivity and Lower Your Total Cost of Ownership

Xenon 197x integrates Honeywell’s latest illumination technology and AI decoding

Versatile Honeywell barcode readers fit multiple enterprise workflows and offer a variety of configurations. Whether they are positioned at the point of sale, stationed above a warehouse conveyor belt or mounted on a wall for quick accessibility, our intuitive barcode readers give enterprises the freedom to deploy them to fit their business-critical needs.

From lightweight handheld readers for retail environments, to ruggedized units for logistics and manufacturing, we provide a complete line of RFID solutions including handheld and fixed readers, printers, tags, and labels. Integrate these products with Honeywell mobile computers, barcode scanners, software, and services to create comprehensive solutions to track and manage with confidence.

Printing operations, whether they are barcode label, ticket, or tag, should be worry free. That’s what Honeywell believes in. Optimizing your print operations throughout the enterprise should be easy to deploy and maximize return on your investment.

Honeywell’s Productivity Solutions and Services business creates mobile computers, printers, and data capture devices that improve worker productivity in thousands of companies of all sizes around the world. Honeywell helped pioneer the barcode scanning market in the 1970s, and over the years its new innovations have helped retailers, distribution centers, transportation and logistics, and healthcare organizations achieve significant improvements in efficiency, speed, and accuracy in their operations.

Deliver increasingly accurate, predictable and efficient business outcomes for our customers in Safety, Sustainability, and Asset Performance.